Why does the suction power of industrial vacuum cleaners disappear? Many customers report that in the process of using industrial vacuum cleaners for one and a half years, the suction power will decrease to varying degrees.
This may sometimes be the reason why the power of the machine itself is too small, but more The situation is due to our improper use, causing a blockage, or some parts are malfunctioning. Therefore, in order to ensure that everyone can use it normally, Lu Xinda will give you a detailed solution. Clean the filter system of the vacuum cleaner regularly.
Every time you use the vacuum cleaner, you must shake off the dust on the filter in time, otherwise, the dust will accumulate and the filter will be blocked. It is not smooth. Slowly, you will find some obvious suction drop. It is recommended to consider whether the filter bag has not been cleaned for a long time.
The second is to check the straws and straws.
If these two places are blocked, the suction power of the vacuum cleaner will be seriously affected. If you usually feel that there is an abnormal sound inside the machine, it is recommended to check whether something is blocked in the pipe.
Third, the brush of the vacuum cleaner is seriously damaged.
If the brush does not fit the floor well, its cleanliness will be seriously affected. Therefore, many times, we find that the electrode is getting more and more normal, but the dust on the ground is still. This may be because the brush is damaged too badly, prompting you to replace it in the form of a strike.
Fourth, there are problems with the sealing of the vacuum cleaner.
When the screws and washers around the motor are loose, the vacuum cleaner cannot work normally and needs to be tightened at this time. If the gasket is worn due to poor sealing, it should be replaced in time.
In addition, the fastening of the fan blades and the tightness between the upper cover and the middle shell will also affect the suction power of the industrial vacuum cleaner. For these different causes of machine failures, we can solve them in a targeted manner to better serve everyone's service.
The suction power of the vacuum cleaner will not disappear inexplicably. The general reasons are in the above points. Careful inspection can solve the problem. If you have tried all of the above and still have not been solved, please contact us and give you a detailed video guide!
Publication Date: 20 August, 2020
Category:
Industrial Vacuum Cleaner
